Hollow Shaft Motor HSM 09J
Low Voltage
HSM 09 J
- Our smallest hollowshaft motor, HSM 09J with a 45 mm hollow shaft where the thru center hole is 30 mm.
- The hollow shaft allows for example axles, cables, liquids or laser beams to be passed through the motor.
- HSM 09J has a rated speed 3000 rpm, rated torque 2,6 Nm and a compact length of 96,9 mm.
- Weight is only 3,3 kg.
- HSM motors are as standard available with sin-cosin feedback system with either EnDat or Hiperface protocol and a number of drive compatible drive pinouts.
- IP 65 as a standard. Can be ordered with IP 67.
- For further information see datasheet for HSM 09J.
HSM 09 J Low Voltage Product Data:
- Rated speed [rpm]: 3000
- Low-speed torque [Nm]: 2.9
- Rated torque [Nm]: 2.6
- Peak torque [Nm]: 7.3
- Length [mm]: 96.9
- Flange size [mm]: 92
- Mass [kg]: 3.3
- Inertia [kgcm^2]: 5.1
- Shaft dia [mm]: 45 j6
- Thru hole: 30 (up to 40 on request)
Show in 3-D viewer or download file
Hollow Shaft
HSM 09 J Low Voltage
Instructions for showing product in 3-D viewer or downloading a CAD- or pdf-file:
- Customize filter and select product in the table below
- For download, choose CAD-format in the drop-down menu at the right.
- Click on the green cubic icon on the far left of the table and wait for the process bar to reach 100%.
- CAD-file is now downloaded to your local folder “Downloaded Files”.
- The 3-D picture appears in the viewer to the right.
- Optional: Click the 3-D picture to enlarge it.
- For download of info sheet in pdf-format, click the pdf-icon.
Note: This section is only available on desktop version of the web site.
Show in 3-D viewer or download file
Solid Shaft Motors
HDD 09 E
This section is only available on desktop version of the web site.
Go to desktop to view a rotating picture of the specified model, or download a CAD- or pdf-file.
Table_Hollow_Shaft_Motor_Size_90_HSM09J
Technical data table
Hollow Shaft Servo Motor – All Low Voltage models
Type | Torque | Speed | Winding Fa (48 VAC) | Length* | Mass** | Inertia** | |||
MO | Mn | n | IO | In | w/o brake | with brake | |||
Click on type for more info: | [Nm] | [Nm] | [rpm] | [A rms] | [A rms] | [mm] | [mm] | [kg] | [kgcm2] |
1.3 | 1.2 | 3000 | 17 | 16 | 47.2 | 72.7 | 1.8 | 1.3 | |
2.8 | 2.3 | 3000 | 28 | 28 | 59.6 | 85.1 | 2.4 | 2.8 | |
5.2 | 3.6 | 3000 | 47 | 40 | 87.2 | 112.7 | 3.6 | 6.1 | |
2.8 | 2.3 | 3000 | 28 | 28 | 59.6 | 85.1 | 2.1 | 2.6 | |
5.2 | 3.6 | 3000 | 47 | 40 | 87.2 | 112.7 | 3.0 | 5.5 | |
2.8 | 2.3 | 3000 | 28 | 28 | 96.9 | - | 3.3 | 5.1 | |
5.2 | 3.6 | 3000 | 47 | 40 | 124.5 | - | 3.8 | 7.8 | |
* Housing length without outgoing shaft