Our Products
Hollow Shaft Motor HSM 09J
HSM 09 J
- Our smallest hollowshaft motor, HSM 09J with a 45 mm hollow shaft where the thru center hole is 30 mm.
- The hollow shaft allows for example axles, cables, liquids or laser beams to be passed through the motor.
- HSM 09J has a rated speed 3000 rpm, rated torque 2,6 Nm and a compact length of 96,9 mm.
- Weight is only 3,3 kg.
- HSM motors are as standard available with sin-cosin feedback system with either EnDat or Hiperface protocol and a number of drive compatible drive pinouts.
- IP 65 as a standard. Can be ordered with IP 67.
- For further information see datasheet for HSM 09J.
HSM 09 J Product Data:
- Rated speed [rpm]: 3000
- Low-speed torque [Nm]: 2.9
- Rated torque [Nm]: 2.6
- Peak torque [Nm]: 7.3
- Length [mm]: 96.9
- Flange size [mm]: 92
- Mass [kg]: 3.3
- Inertia [kgcm^2]: 5.1
- Shaft dia [mm]: 45 j6
- Thru hole: 30 (up to 40 on request)
Show in 3-D viewer or download file
Hollow Shaft
HSM 09 J
Instructions for showing product in 3-D viewer or downloading a CAD- or pdf-file:
- Select/find your product by specifying motor criteria in the dropdowns in the header of the table below ↓
- Choose your prefered CAD-format in the drop-down under the viewer to the right →
- To start downloading click the green cubic icon to the far left in the table below ↓. A green process bar, under the viewer to the right →, will now start to load.
- The CAD-file is downloaded to your local folder “Downloaded Files” when the bar has reached 100%.
- A 3-D picture appears in the viewer to the right. Click the 3-D picture to enlarge the image and the red button in the bottom of the page to close it.
- To download a information sheet in pdf-format, click the red pdf-icon.
Note: This section is only available on desktop version of the web site.
Show in 3-D viewer or download file
Solid Shaft Motors
HDD 09 E
This section is only available on desktop version of the web site.
Go to desktop to view a rotating picture of the specified model, or download a CAD- or pdf-file.
Table_Hollow_Shaft_Motor_Size_90_HSM09J
Technical data table
Hollow Shaft Servo Motor – All HSM09 models
Type | Torque | Speed | Winding Ma (230 VAC) | Winding Pa (400 VAC) | Length* | Mass | Inertia | ||||
M0 | Mn | n | I0 | In | I0 | In | w/o brake | with brake | |||
Click on type for more info: | [Nm] | [Nm] | [rpm] | [A rms] | [A rms] | [A rms] | [A rms] | [mm] | [mm] | [kg] | [kgcm2] |
2.9 | 2.6 | 3000 | 4,4 | 4,0 | 2.6 | 2.3 | 96.9 | - | 3.3 | 5.1 | |
5.2 | 3.6 | 3000 | 7,4 | 6,3 | 3.9 | 3.3 | 124.5 | - | 3.8 | 7.8 | |
6.5 | 4.8 | 2000 | - | - | 5.3 | 3.0 | 146.9 | - | 4.6 | 10.0 | |
* Housing length without outgoing shaft