Hollow Shaft Motor HSM 09N
HSM 09 N
- A more powerful version HSM 09N , with a rated speed 3000 rpm, rated torque 3.6 Nm, the length of 124,5 mm and with a hollow shaft of 45 mm where the thru center hole is 30 mm.
- Weight is only 3,8 kg.
- The hollow shaft allows for example axles, cables, liquids or laser beams to be passed through the motor.
- HSM motors are as standard available with sin-cosin feedback system with either EnDat or Hiperface protocol and a number of drive compatible drive pinouts.
- IP 65 as a standard. Can be ordered with IP 67.
- For further information see datasheet below for HSM09N.
HSM 09 N Product Data:
- Rated speed [rpm]: 3000
- Low-speed torque [Nm]: 5.2
- Rated torque [Nm]: 3.6
- Peak torque [Nm]: 16.6
- Length [mm]: 124.5
- Flange size [mm]: 92
- Mass [kg]: 3.8
- Inertia [kgcm^2]: 7.8
- Shaft dia [mm]: 45 j6
- Thru hole: 30 (up to 40 on request)
View Product Datasheets
Show product in 3-D viewer or downloading the CAD-file below↓
Show in 3-D viewer or download file
Hollow Shaft
HSM 09 N
Instructions for showing product in 3-D viewer or downloading a CAD- or pdf-file:
- Customize filter and select product in the table below
- For download, choose CAD-format in the drop-down menu at the right.
- Click on the green cubic icon on the far left of the table and wait for the process bar to reach 100%.
- CAD-file is now downloaded to your local folder “Downloaded Files”.
- The 3-D picture appears in the viewer to the right.
- Optional: Click the 3-D picture to enlarge it.
- For download of info sheet in pdf-format, click the pdf-icon.
Note: This section is only available on desktop version of the web site.
Show in 3-D viewer or download file
Solid Shaft Motors
HDD 09 E
This section is only available on desktop version of the web site.
Go to desktop to view a rotating picture of the specified model, or download a CAD- or pdf-file.
Technical data table
Hollow Shaft Servo Motor – All HSM09 models
Type | Torque | Speed | Winding Ma (230 VAC) | Winding Pa (400 VAC) | Length* | Mass | Inertia | ||||
 | M0 | Mn | n | I0 | In | I0 | In | w/o brake | with brake | ||
Click on type for more info: | [Nm] | [Nm] | [rpm] | [A rms] | [A rms] | [A rms] | [A rms] | [mm] | [mm] | [kg] | [kgcm2] |
2.9 | 2.6 | 3000 | 4,4 | 4,0 | 2.6 | 2.3 | 96.9 | - | 3.3 | 5.1 | |
5.2 | 3.6 | 3000 | 7,4 | 6,3 | 3.9 | 3.3 | 124.5 | - | 3.8 | 7.8 | |
6.5 | 4.8 | 2000 | - | - | 5.3 | 3.0 | 146.9 | - | 4.6 | 10.0 | |
* Housing length without outgoing shaft