Bellow Coupling Options
Bellow Couplings:
Two types of couplings are presently available, all using metal bellows. There are two bellow lengths that accommodate run-outs of 0.2 and 0.3 mm respectively. Both lengths have a stiffness of approx. 9 kNm/rad.
The CBE model uses an expanding shaft. The standard diameter of the expanding shaft is 16f7; other shafts available on request.
The CBC model uses a single screw to clamp around the machine shaft. It can be delivered to fit shafts from ø5 to ø20 mm for ICM09 and up to ø25 for ICM14.
Show in 3-D viewer or download file
Bellow Coupling Series 09
Instructions for showing product in 3-D viewer or downloading a CAD- or pdf-file:
- Select/find your bellow coupling in the table below ↓
- Choose your prefered CAD-format in the drop-down under the viewer to the right →
- To start downloading click the green cubic icon to the far left in the table below ↓. A green process bar, under the viewer to the right →, will now start to load.
- The CAD-file is downloaded to your local folder “Downloaded Files” when the bar has reached 100%.
- A 3-D picture appears in the viewer to the right. Click the 3-D picture to enlarge the image and the red button in the bottom of the page to close it.
- To download an information sheet in pdf-format, click the red pdf-icon.
Note: This section is only available on desktop version of the web site.
Internal Coupling Motor Types
ICM 09 J
Internal Coupling 92 mm frame size
3000 rpm
ICM 09 N
Internal Coupling 92 mm frame size
3000 rpm
ICM 14 J
Internal Coupling 140 mm frame size
3000 rpm
ICM 14 N
Internal Coupling 140 mm frame size
3000 rpm
Standard version
Resolver feedback
Internal coupling
Protection IP-65
Straight connectors top mounted
PTC sensor
Windings 230/400 Vac (320/560 Vdc)
Options
Hiperface, Endat
Holding brake
Protection IP-67
Angled connectors, rotatable
KTY84, PT1000 sensors
Customized versions
Contact HDD Servo for details