Internal Coupling Motors
See the video visualising the comparison with a reference motor and the HDD integrated bellow coupling motor.
The unique HDD technology with an integrated bellow coupling, enables a more compact installation of servo motors. The motors are available in 92 – and 140 mm frame sizes, in a torque range from 2.3 Nm to 10 Nm, rated 3000 rpm and wound for 230 or 400 VAC. All motors can be supplied with or without brake.
The standard motor is equipped with straight connectors, resolver feedback, PTC thermal sensor and IP-65 protected. As options the integrated bellow coupling motor can be ordered with a variety of feedback systems, angled connectors, IP-67 protected and with pressurized air connection.
In the world of precision engineering, space and weight are crucial considerations. HDD has long been at the forefront of innovation with its ultra-compact servo motors. The Internal Coupling revolutionary Servo Motor integrates a high-performance bellows coupling directly into its design, further reducing the need for additional components and streamlining engineering solutions. Read full article here >
ICM 09 J
Internal Coupling 92 mm frame size
3000 rpm
ICM 09 N
Internal Coupling 92 mm frame size
3000 rpm
ICM 14 J
Internal Coupling 140 mm frame size
3000 rpm
ICM 14 N
Internal Coupling 140 mm frame size
3000 rpm
Standard version
Resolver feedback
Internal coupling
Protection IP-65
Straight connectors top mounted
PTC sensor
Windings 230/400 Vac (320/560 Vdc)
Options
Hiperface, Endat
Holding brake
Protection IP-67
Angled connectors, rotatable
KTY84, PT1000 sensors
Customized versions
Contact HDD Servo for details
Technical data table Internal Coupling Motors
Type | Torque | Speed | Winding Ma (230 (VAC) | Winding Pa (400 VAC) | Length* | Mass** | Inertia | ||||
 | M0 | Mn | n | I0 | In | I0 | In | w/o brake | with brake | ||
Click on type for more info: | [Nm] | [Nm] | [rpm] | [A rms] | [A rms] | [A rms] | [A rms] | [mm] | [mm] | [kg] | [kgcm2] |
2.8 | 2.3 | 3000 | 4.3 | 4.0 | 2.5 | 2.3 | 59.6 | 85.1 | 2.1 | 2.6 | |
5.2 | 3.6 | 3000 | 7.4 | 6.3 | 3.9 | 3.3 | 87.2 | 112.7 | 3.0 | 5.5 | |
10.0 | 7.0 | 3000 | 14.0 | 10.6 | 7.0 | 5.3 | 80.9 | 80.9 | 5.7 | 13.7 | |
18.0 | 10.0 | 3000 | 20.5 | 12.6 | 12.5 | 7.7 | 114.1 | 114.1 | 9.2 | 33.6 | |
* Housing length without feedback cover. **With resolver feedback and without brake.
Bellow Couplings:
Two types of couplings are presently available, all using metal bellows. There are two bellow lengths that accommodate run-outs of 0.2 and 0.3 mm respectively. Both lengths have a stiffness of approx. 9 kNm/rad.
The CBE model uses an expanding shaft.
The standard diameter of the expanding shaft is 16f7; other shafts available on request.
The CBC model uses a single screw to clamp around the machine shaft. It can be delivered to fit shafts from ø5 to ø20 mm for ICM09 and up to ø25 for ICM14.
